EDGE™ Solutions Module, Ultra Low Loss 12 F, LC Duplex to MTP® Connector, 50 μm multimode (OM4)

EDGE™ modules provide the interface between the MTP®
connector on the trunk and the LC duplex jumpers that will
then connect directly into the electronics or as a crossconnect
in the main distribution area (MDA). The internal
wiring based on universal polarity ensures the correct fibre
polarity throughout the entire system independent of how
many modules are implemented within the link. Low-loss
connectivity enables design flexibility to permit multiple
potential connections within the system (e.g. 4-module
link). All EDGE modules can be installed from the front or
the rear of any EDGE Solutions housing using a simple
release mechanism negating the need for any specialist
tools. LC duplex adapters feature hinged shutters that
move up and out of the way when the connector is
inserted. Specially designed indents in the shutters ensure
that the end faces of the connectors are never touched.
These shutters replace the standard dust caps that
typically once removed are never replaced, exposing the
interior end faces to dust particles and possible damage. In
addition, the shutters are visual fault locator (VFL)
compatible allowing easy port identification whilst defusing
the VFL light to ensure adequate eye safety.