Print3-fan unit uses to install to the roof of the nerwork cabinets MGSE series instead of the blank.
"not suitable for installation in wall cabinets"
The SUNNON fans installed in the 3-fan unit. SUNNON fans shows a high reliability and output along the years. Fans covered by wire mash that avoid extra turbulence of the air and not resist to the air flow. So 3-fan unit produce low noise. Server inside the cabinet produce more noise than 3-fan unit.
You can install as many 3-fan units to the roof as many blanks exist at the roof of the cabinet. For instance 675mm depth cabinet - 2, 865mm - 3, 1055 mm - 4. 3-fan units can be connected to the power as altogether (one 3-fan unit take a power from the naibour unit) as separatley. Each 3-fan unit can be managed by its own termostat. So many 3-fan units can be managed by cascade scheme (each 3-fan unit switching on reaching citrain temperatutre in the cabinet)
To install the 3-fan unit to the bottom of the cabinet reverse 3-fan unit must be used.
3-fan unit connects to the power by a standard computer power cord.
To join the power of the 3-fan blocks can be used the power cord PC6063-0.3m 30cm long, with a connector (C13-C14).
For installation in cabinets in width 800mm, an additional element is needed transition fan unit MGSE (610mm wide) to 800mm wide cabinets, (2 pieces), black. Article: UA-MGSE-PEM8B
