Corrugated flexible two-layer Kopoflex pipe, red, draft; D63mm; polyethylene HDPE; 50 m

Designed for mechanical protection of all types of power and telecommunication lines. The protective shell is manufactured in accordance with ČSN EN 61 386-24. A retractable wire or tape, as well as a clutch, is inserted into each roll. If a sealing ring is used, the degree of protection is IP67. When mechanically compressing the layers, care should be taken not to exceed the permissible load standards.

• Weight 0.2200 kg/m
• The color is red
• HDPE material
• Halogen-free material yes
• Installation temperature -25 - 90 °C
• Operating temperature -55 - 90 °C
• Mechanical resistance 450 N/20 cm
• The outer diameter is 63 mm
• Inner diameter 52 mm
• Tolerances Length ± 0.5 m
• The minimum bending radius is 350 mm
• Manufacturer's recommendation
• The manufacturer recommends installing plastic pipes at temperatures above 0 °C
• Fire resistance class of base material A1
• Degree of protection
• IP-40 if IP-67 sealing ring is used
• Standards ČSN EN 61386-24