Everon™ Copper Datacom S/FTP 550/23, Category 6A, LSZH™/FRNC, B2ca 4P, Blue

Features and Benefits

• S/FTP 550/23s copper cable specified up to 550 MHz
• Fulfils all requirements of category 6A according to standards EN 50288-10-1 and IEC 61156-5
• Ensures high system margins according ISO/IEC 11801 Ed.2.2 (2011) and EN 50173 series (2011)
• Suitable for 10 Gigabit Ethernet according to IEEE 802.3an
• Each twisted pair is individually shielded with a Al-laminated foil around each pair (PIMF)
• Overall shielding with tinned copper wire braiding
• Flame retardant according to IEC 60332-1, EN 13501-6 and EN 50575 as well as non-corrosive according to IEC 60754-2 (NC)
• Low smoke according to IEC 61034 and EN 50268; halogen-free (ZH/0H), no development of toxic gases in case of fire
• Satisfies Class B interference radiation as well as immunity standards (EN 55022 and EN 55024)
• Supports Power over Ethernet (PoE / PoE+/ PoE++) according IEEE 802.3bt
• S/FTP 550/23s copper cable specified up to 550 MHz

General Specifications

• Temperature range, operation -20 °C to 60 °C
• Environment Indoor
• Category 6A
• Cable type S/FTP
• Bandwidth 550 MHz
• Halogen-free Yes
• Construction Simplex, 4P
• Reaction to fire B2ca
• Conductor Copper Wire, AWG 23
• Conductor insulation Halogen-free foam-skin material
• Twisting 2 cores to a pair
• Pair screen Al-laminated foil around each pair
• Outer jacket material LSZHTM/FRNC
• Outer jacket colour Blue
• Fire load 500 MJ/m
• Nominal outer diameter 7 mm
• Min. bend radius installation 8x Cable-Ø (over flat side)
• Maximum tensile strength 113 N

Electrical Characteristics

• Conductor resistance unbalance 1%
• Delay skew 9 ns/100 m
• Max. loop resistance 165 MΩ*km
• Propagation delay 425 ns/100 m
• Voltage rating Less than 75 V d.c max and less than 50 V a.c max
• Insulation resistance 5000 MΩ*km
• Surface transfer impedance 100 mΩ
• Propagation velocity at >10 MHz (NVP*c) 79 %
• Coupling attenuation 80 dB
• Length 1000 m
• Weight 62 kg/km