Terminal block, 3Px4x1.5 ... 4mm2, for copper. lane (PE-N-L1), black, WAGO

862-2652  terminal blocks with a hull mounted, 2-pin, 4 mm2, white.
862-1503   terminal blocks with a hull mounted, 3-pin, 4 mm2, black.

Rack-mount terminal blocks 862 series with fixing -tion designed to minimize dis-moves for the installation of wires , with requirements for accommodation, providing a connection points , ease of installation, marking and work:
  • Series 862 is equipped with terminals for connecting up to four conductors ranging in size from 0.5 mm2 to 4 mm2 (AWG 20 - 12). Since there is a possibility of using multiple points of connection to the contact, for the same position , you can use terminal wires of different Sizes .
  • Spring clamps allow you to easily perform the connection of single-core , multi-strand conductors and conductors i ultrasonically welded conductor ends from 0.5 mm2 to 4 mm2 (AWG 20 - 12 ) are directly in contact . (The length of the cable end with the crimped wires - not less than 10 mm).
  • Optional - with convenient self-aligning earth contact .
  • Retainer strap-on to speed up installation.
  • Push-button switches for easy operation with a tool or by hand.
  • Built- point measurements simplify the test with the test plug.
  • Flexible labeling with a standard marking (serial ). Marking the customer with a large number of orders.

Wire size: 0.5-4 mm2
Voltage: 500 V.
Current: 32A.
Stripping: 10-11 mm.