Clip for fixing pipes D18-20, with nut D8 / 36 and the impact screw, gray, (pac.50pc)

A clamp for pipes and cables Ø18-20 with an impact screw is a plastic fastener for drive-in installation on various working surfaces. Used for fastening and holding PVC pipes, open cables or organized bundles of cables with an outer diameter of up to 16 mm. Made from PP A4 polypropylene. Resistant to temperature changes and wear-resistant. Not resistant to UV radiation. The design is detachable, the dowel acts not only as an embedded part, but also as a latch that closes the holder. The reinforced locking part of the dowel and high-quality casting with a minimum amount of flash ensures the reliability and durability of the fastener, as well as ease of installation.