Everon® Copper Datacom S/FTP 1200/22, Category 7A, LSZH™/FRNC, Dca

The Everon® Copper Datacom S/FTP 1200/22 cable is designed up to 1200MHz and its transmission characteristics exceed Category 7A specifications according to EN50288-9-1 IEC 61156-5. High system margins for the complete link according to the last version of ISO/IEC 11801 and EN 50173 (Series) will be achieved by using corresponding hardware together with this highend copper cable. Due to the very low delay skew between the pairs these FutureCom cables are especially suitable for Gigabit Ethernet and also for transmission of digital data for future applications up to 10 Gigabit Ethernet according to IEEE 802.3an. The cable has a streamlined construction and low weight. Overall shielding with tinned copper wire braiding and each twisted pair is individually shielded with a Allaminated foil (S/FTP). The cable satisfies Class B interference radiation standards according to EN 55022, as well as immunity according to EN 55024, which enables the realization of CE-compatible networks.

General Specifications

• Category 7A
• Cable type S/FTP
• Halogen-free Yes
• Construction Simplex, 4P
• Reaction to Fire Dca, s2, d2, a1

Standards

• RoHS Free of hazardous substances according to RoHS 2011/65/EU
• Approvals and Listings IEC 61156-5,  EN 50288-9-1,  ISO/IEC 11801 Ed. 2.2,  EN 50173-1,  ANSI/TIA-568-C.2,  IEC 60304 
• Design And Test Criteria Tested and approved for Power over Ethernet applications (PoE/PoE+/4PPoE) according to IEEE 802.3af, IEEE 802.3at and IEEE 802.3bt up to 90W 
• Flame propagation test IEC 60332-1
• Smoke density IEC 61034-2
• Halogen content test Zero Halogen to IEC 60754-1
• Level of corrosion Non-corrosive according to IEC 60754-2

Environmental Conditions

• Halogen-free Yes
• Temperature range, installation 0 °C  to  50 °C   
• Temperature range, operation -20 °C  to  60 °C   

Cable Design

• Conductor Copper Wire, AWG 22/1
• Conductor insulation Halogen-free foam-skin material
• Twisting 2 cores to a pair
• Pair screen Al-laminated foil around each pair
• Overall screen Copper braid, tinned
• Outer jacket material LSZH/FRNC
• Outer jacket colour Blue

Mechanical Characteristics

• Fire load 630 MJ/km
• Nominal outer diameter 7.48 mm 
• Min. bend radius installation 8x Cable-Ø
• Min. bend radius operation 3x Cable-Ø (over flat side)
• Maximum tensile strength 179 N

Electrical Characteristics

• Conductor resistance unbalance 1 %
• Delay skew 15 ns/100 m
• Max. loop resistance 128 Ω/km
• Propagation delay 450 ns/100 m
• Voltage rating Less than 75 V DC max and less than 50 V ACC max
• Propagation velocity at >10 MHz (NVP*c) 79 %
• Coupling attenuation 85 dB
• Segregation Class d
• Insulation Resistance > 5000 MΩ*km

Dimensions

• Weight 62 kg